Dr. Salgado-Mendoza, Pablo

Wood is a complex material whose main chemical constituents are cellulose, hemicellulose, and lignin. These components are studied in various industries after the wood has been processed by chemical or mechanical methods. For the paper industry, it is relevant to determine the pentosan content in cellulose pulp because it indicates the degree of retention of hemicellulose. Hemicellulose contributes to the resistance, increasing the yield of the pulp, and therefore, high pentosan content is desirable. In this way, this research focused on the determination of the pentosan content in hard and softwood pulps between 0.81 to 18.4%. The pentosan content can be directly determined by a chemical method, although these conventional methods are long, expensive, generate a high amount of corrosive waste, and are not recommended for routine analysis. Therefore, in this research, an alternative method was developed using near-infrared spectroscopy together with partial least squares regression to predict the pentosan content in pulps. This new method is fast, inexpensive, analysis is direct and non-destructive. Finally, the pentosan calibration model was validated by cross-validation and the predicted external samples were quantified with precision between 0.008 and 0.043 and accuracy between 3.9 and 12.2%, while SEP has a variability of 1.267% of pentosan for this model.

Water pollution, particularly from organic contaminants like dyes, is a pressing issue, prompting exploration into advanced oxidation processes (AOPs) as potential solutions. This study focuses on synthesizing Cu2O on cellulose-based fabric using Eucalyptus globulus leaf extracts. The resulting catalysts effectively degraded methylene blue through photocatalysis under LED visible light and heterogeneous Fenton-like reactions with H2O2, demonstrating reusability. Mechanistic insights were gained through analyses of the extracts before and after Cu2O synthesis, revealing the role of phenolic compounds and reducing sugars in nanoparticle formation. Cu2O nanoparticles on cellulose-based fabric were characterized in terms of their morphology, structure, and bandgap via SEM-EDS, XRD, Raman, FTIR, UV–Vis DRS, and TGA. The degradation of methylene blue was pH-dependent; photocatalysis was more efficient at neutral pH due to hydroxyl and superoxide radical production, while Fenton-like reactions showed greater efficiency at acidic pH, primarily generating hydroxyl radicals. Cu2O used in Fenton-like reactions exhibited lower reusability compared to photocatalysis, suggesting deterioration. This research not only advances understanding of catalytic processes but also holds promise for sustainable water treatment solutions, contributing to environmental protection and resource conservation.

Recalcitrant compounds resulting from anthropogenic activity are a significant environmental challenge, necessitating the development of advanced oxidation processes (AOPs) for effective remediation. This study explores the synthesis of cuprous oxide nanoparticles on cellulose-based paper (Cu2O@CBP) using Eucalyptus globulus leaf extracts, leveraging green synthesis techniques. The scanning electron microscopy (SEM) analysis found the average particle size 64.90 ± 16.76 nm, X-ray diffraction (XRD) and Raman spectroscopy confirm the Cu2O structure in nanoparticles; Fourier-transform infrared spectroscopy (FTIR) suggests the reducing role of phenolic compounds; and ultraviolet–visible diffuse reflectance spectroscopy (UV-Vis DRS) allowed us to determine the band gap (2.73 eV), the energies of the valence band (2.19 eV), and the conduction band (−0.54 eV) of Cu2O@CBP. The synthesized Cu2O catalysts demonstrated efficient degradation of methylene blue (MB) used as a model as recalcitrant compounds under LED-driven visible light photocatalysis and heterogeneous Fenton-like reactions with hydrogen peroxide (H2O2) using the degradation percentage and the first-order apparent degradation rate constant (kapp). The degradation efficiency of MB was pH-dependent, with neutral pH favoring photocatalysis (kapp = 0.00718 min−1) due to enhanced hydroxyl (·OH) and superoxide radical (O2·−) production, while acidic pH conditions improved Fenton-like reaction efficiency (kapp = 0.00812 min−1) via ·OH. The reusability of the photocatalysts was also evaluated, showing a decline in performance for Fenton-like reactions at acidic pH about 22.76% after five cycles, while for photocatalysis at neutral pH decline about 11.44% after five cycles. This research provides valuable insights into the catalytic mechanisms and supports the potential of eco-friendly Cu2O nanoparticles for sustainable wastewater treatment applications.