Research Outputs
Optimization of Fenton technology for recalcitrant compounds and bacteria inactivation
In this work, the Fenton technology was applied to decolorize methylene blue (MB) and to inactivate Escherichia coli K12, used as recalcitrant compound and bacteria models respectively, in order to provide an approach into single and combinative effects of the main process variables influencing the Fenton technology. First, Box–Behnken design (BBD) was applied to evaluate and optimize the individual and interactive effects of three process parameters, namely Fe2+ concentration (6.0 Ă— 10−4, 8.0 Ă— 10−4 and 1.0 Ă— 10−3 mol/L), molar ratio between H2O2 and Fe2+ (1:1, 2:1 and 3:1) and pH (3.0, 4.0 and 5.0) for Fenton technology. The responses studied in these models were the degree of MB decolorization (D%MB), rate constant of MB decolorization (kappMB) and E. coli K12 inactivation in uLog units (IuLogEC). According to the results of analysis of variances all of the proposed models were adequate with a high regression coefficient (R2 from 0.9911 to 0.9994). BBD results suggest that [H2O2]/[Fe2+] values had a significant effect only on D%MB response, [Fe2+] had a significant effect on all the responses, whereas pH had a significant effect on D%MB and IuLogEC. The optimum conditions obtained from response surface methodology for D%MB ([H2O2]/[Fe2+] = 2.9, [Fe2+] = 1.0 Ă— 10−3 mol/L and pH = 3.2), kappMB ([H2O2]/[Fe2+] = 1.7, [Fe2+] = 1.0 Ă— 10−3 mol/L and PH = 3.7) and IuLogEC ([H2O2]/[Fe2+] = 2.9, [Fe2+] = 7.6 Ă— 10−4 mol/L and pH= 3.2) were in good agreement with the values predicted by the model.
Biogenic synthesis based on cuprous oxide nanoparticles using Eucalyptus globulus extracts and its effectiveness for removal of recalcitrant compounds
Recalcitrant compounds resulting from anthropogenic activity are a significant environmental challenge, necessitating the development of advanced oxidation processes (AOPs) for effective remediation. This study explores the synthesis of cuprous oxide nanoparticles on cellulose-based paper (Cu2O@CBP) using Eucalyptus globulus leaf extracts, leveraging green synthesis techniques. The scanning electron microscopy (SEM) analysis found the average particle size 64.90 ± 16.76 nm, X-ray diffraction (XRD) and Raman spectroscopy confirm the Cu2O structure in nanoparticles; Fourier-transform infrared spectroscopy (FTIR) suggests the reducing role of phenolic compounds; and ultraviolet–visible diffuse reflectance spectroscopy (UV-Vis DRS) allowed us to determine the band gap (2.73 eV), the energies of the valence band (2.19 eV), and the conduction band (−0.54 eV) of Cu2O@CBP. The synthesized Cu2O catalysts demonstrated efficient degradation of methylene blue (MB) used as a model as recalcitrant compounds under LED-driven visible light photocatalysis and heterogeneous Fenton-like reactions with hydrogen peroxide (H2O2) using the degradation percentage and the first-order apparent degradation rate constant (kapp). The degradation efficiency of MB was pH-dependent, with neutral pH favoring photocatalysis (kapp = 0.00718 min−1) due to enhanced hydroxyl (·OH) and superoxide radical (O2·−) production, while acidic pH conditions improved Fenton-like reaction efficiency (kapp = 0.00812 min−1) via ·OH. The reusability of the photocatalysts was also evaluated, showing a decline in performance for Fenton-like reactions at acidic pH about 22.76% after five cycles, while for photocatalysis at neutral pH decline about 11.44% after five cycles. This research provides valuable insights into the catalytic mechanisms and supports the potential of eco-friendly Cu2O nanoparticles for sustainable wastewater treatment applications.
In situ synthesis of Cu2O nanoparticles using eucalyptus globulus extract to remove a dye via advanced oxidation
Water pollution, particularly from organic contaminants like dyes, is a pressing issue, prompting exploration into advanced oxidation processes (AOPs) as potential solutions. This study focuses on synthesizing Cu2O on cellulose-based fabric using Eucalyptus globulus leaf extracts. The resulting catalysts effectively degraded methylene blue through photocatalysis under LED visible light and heterogeneous Fenton-like reactions with H2O2, demonstrating reusability. Mechanistic insights were gained through analyses of the extracts before and after Cu2O synthesis, revealing the role of phenolic compounds and reducing sugars in nanoparticle formation. Cu2O nanoparticles on cellulose-based fabric were characterized in terms of their morphology, structure, and bandgap via SEM-EDS, XRD, Raman, FTIR, UV–Vis DRS, and TGA. The degradation of methylene blue was pH-dependent; photocatalysis was more efficient at neutral pH due to hydroxyl and superoxide radical production, while Fenton-like reactions showed greater efficiency at acidic pH, primarily generating hydroxyl radicals. Cu2O used in Fenton-like reactions exhibited lower reusability compared to photocatalysis, suggesting deterioration. This research not only advances understanding of catalytic processes but also holds promise for sustainable water treatment solutions, contributing to environmental protection and resource conservation.
Green synthesis of Ag/Ag2O nanoparticles on cellulose paper and cotton fabric using Eucalyptus globulus leaf extracts: Toward the clarification of formation mechanism
The present study reports on phenolic compounds profile of Eucalyptus globulus leaf extracts and exhibiting their role in obtaining silver nanoparticles (AgNP) by a green method on paper and fabric supports with or without addition of NaOH. To know the mechanism involved in the formation of AgNP, FTIR, UV–Visible spectrophotometry and UHPLC-QTOF-MS analyzes were carried out of E. globulus extracts before and after the synthesis of AgNP. The FTIR, UV–Visible spectrophotometry analyzes identified phenolic compounds, and to a lesser extent reducing sugars mainly participate as reducing agents in the formation of AgNP, while phenolic compounds would participate as stabilizing agents. UHPLC-QTOF-MS analyzes identified derived from gallic acid play an important role in AgNP formation. AgNPs were characterized in their morphology and structure by SEM-EDS, TEM-SAED, XRD, UV–Vis diffuse reflectance and TGA. The results indicate the formation of Ag and/or Ag2O nanoparticles depending on the influence of NaOH in the reaction system. Furthermore, the support used (paper or fabric), it would influence the concentration of AgNPs formed, the consumption of phenolic compounds, the antibacterial activity and band-gap of AgNPs synthesized. This study provides evidence of a simple process to support AgNP on cellulose and providing key information towards the definitive clarification of the mechanism of formation of AgNP by green synthesis.