Dr. Valdes-Morales, Hector

Antibiotic overuse and indiscriminate disposal ultimately lead to overexploitation of the ecosystems expanding requirements, producing significant environmental and biological consequences. Advanced oxidation processes (AOPs) have kindled the interest of many researchers in targeting the destruction of antimicrobial and waterborne pollutants. As a result, an improvement of low-cost, high-efficiency photocatalysts for the successful decomposition of antibiotics is critical for the cleaning of harmful contaminants in rivers and lakes. In the current work, a simple hydrothermal approach was used to create the bismuth vanadate nanoballs (BiVO4) anchored to the exterior of the ultrathin g-C3N4.It was named g-C3N4/BiVO4(X) (X = 5, 10, 15, and 20%) nanocomposites, and the photocatalytic removal of ciprofloxacin (CPX) and amoxicillin (AMX) was investigated using synthesized composites. According to the advanced characterization techniques, the synthesized composites exhibit superior purity and crystalline nature. The electron transfer occurring within the g-C3N4, in conjunction with the extension of BiVO4 nanoballs, enhances the generation of photoexcited electron−hole (e−/h+) pairs. This phenomenon contributes significantly to the improved photocatalytic activity observed in the g-C3N4/BiVO4 system. Furthermore, the photocatalytic efficiency exhibited by g-C3N4/BiVO4(10%) nanocomposites in antibiotic removal surpasses that of both bare materials and other composite counterparts. The elimination of antibiotics was aided by reactive oxygen species (ROS)such as O2•−, h+, and OH. Finally, g-C3N4/BiVO4(10%), the intermediate byproduct of CPX and AMX decomposition, was discovered, and a probable CPX and AMX removal route was postulated. The g-C3N4/BiVO4(10%) composite exhibits long-term stability after five cycles. This study applies a green and ecologically responsive technique to the development of high-performance photocatalysts for wastewater remediation.

Micrometer-sized polycrystalline anatase particles are widely used in materials and life sciences, serving as essential components in photocatalytic materials. The ability to tailor their composition, shape, morphology, and functionality holds significant importance. In this study, we identified and examined the non-destructive route of Copper(II) implantation at the surface of polycrystalline TiO2. The [Cu(en)(Im)2]2+ complex ion demonstrated a remarkable affinity to concentrate and bind with the semiconductor’s surface, such as anatase, forming a surface-bound adduct: ≡TiO2 + [Cu(en)(Im)2]2+ → ≡TiO2//[Cu(en)(Im)2]2+. The misalignment of Fermi levels in TiO2//[Cu(en)(Im)2]2+ triggered electron transfer, leading to the reduction of the metal center, releasing Copper(I) in the process. Although less efficient, the released Copper(I) encountered a highly favorable environment, resulting in the formation of the surface complex TiO2:CuIIsc. The implanted Cu(I) was converted back into Cu(II) due to re-oxidation by dissolved oxygen. The penetration of the metal ion into the surface level of the polycrystalline TiO2 lattice was influenced by surface residual forces, making surface grafting of the Cu(II) ion inevitable due to surface chemistry. FTIR, UV–vis, Raman, XRD, EPR, and surface morphological (SEM, EDAX, and HRTEM) analyses identified the typical surface grafting of the Cu(II) cluster complex on the anatase surface matrix. Moreover, the XRD results also showed the formation of an impure phase. The TiO2 polycrystalline materials, modified by the incorporation of copper complexes, demonstrated an enhanced visible-light photocatalytic capability in the degradation of Rhodamine B dye in aqueous solutions. This modification significantly improved the efficiency of the photocatalytic process, expanding the applicability of TiO2 to visible light wavelengths. These studies open up the possibility of using copper complexes grafted on metal oxide surfaces for visible-light active photocatalytic applications. Moreover, this investigation not only showcases the improved visible-light photocatalytic behavior of copper-modified TiO2 polycrystalline materials, but also underscores the broader implications of this improvement in the advancement of sustainable and efficient water treatment technologies.

In this article, the role of surface sites of modified zeolites with semiconductor nanoparticles as alternative photocatalyts for protecting post-harvest foodstuff from the detrimental effects of ethylene is addressed. Two single and one double catalyst based on zinc and copper oxides supported over modified zeolite samples were prepared. Physical, chemical, and surface properties of prepared materials were studied by several characterization methods. UV-Vis absorption spectra show that the applied modification procedures increase the optical absorption of light in the UV and visible regions, suggesting that an increase in the photocatalytic activity could take place mainly in the obtained co-impregnated catalyst. An ethylene conversion around 50% was achieved when the parent natural zeolite support was modified with both transition metal oxides, obtaining higher removal efficiency in comparison to single oxide catalysts. Adsorption and photocatalytic oxidation experiments were also performed using single and double catalysts supported over fumed silica, attaining lower ethylene conversion and thus highlighting the role of zeolite surfaces as adsorption sites for ethylene during photocatalytic reactions. Operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) studies reveal that a synergistic mechanism occurs, involving ethylene adsorption at acidic sites of zeolite and its photocatalytic oxidation due to the generation of radicals by the light activation of nanoparticles of zinc and copper oxides.

Fluoroquinolones are extensively used in medicine due to their antimicrobial activity. Their presence in water inhibits microorganism activity in conventional wastewater treatment plants. This study aims to evaluate the technical feasibility of applying heterogeneous catalytic ozonation to eliminate ciprofloxacin (CIP) as a representative of fluoroquinolone antibiotics normally present in municipal wastewater discharges. Experiments were conducted in a semi-batch stirred slurry reactor, using 0.7 L of 100 mg L−1 CIP aqueous solution, at pH 3 and 30 °C. Experimental results show that single ozonation can easily oxidise CIP molecules (68%) within the first 5 min, leading to the generation of refractory oxidation by-products. However, when heterogeneous catalytic ozonation is applied using iron oxide supported on MFI synthetic zeolite, total degradation of CIP is observed at 5 min and a higher mineralisation rate is obtained. A novel sequential process is developed for CIP mineralisation. In a first step, a flash single ozonation is applied and CIP molecules are broken down. Then, a catalytic ozonation step is conducted by adding the Fe/MFI catalyst into the reactor. As a result of catalyst addition, 44% of Total Organic Carbon (TOC) is eliminated within the first 15 min, compared to single ozonation where only 13% of TOC removal is reached in the same time. The application of this sequential process to a real wastewater effluent spiked with CIP leads to 52% of TOC removal.

This study describes theoretical and experimental considerations to optimize the photocatalytic degradation of caffeic acid in water using 3D-BiOBr based materials under visible light irradiation. Three BiOBr materials were synthesized through the solvothermal method using different bromide sources, namely potassium bromide (KBr) and the ionic liquid (IL) 1-butyl-3-methylimidazolium bromide. Morphological and chemical changes were observed in IL based 3D-BiOBr materials. The theoretical optimization of the experimental conditions in heterogeneous photocatalysis tests (pH and dose of catalyst) were simulated using the MODDE 12.0.1 software. A central composite design (CCD) was applied to obtain a response surface to elucidate the optimal conditions. This model predicted that the maximum photocatalytic degradation can be achieved at pH of 6.7 and a photocatalyst dose of 344 mg L−1. The optimal experimental conditions were tested using the three synthesized 3D-BiOBr materials. The results showed that the highest degradation efficiency and mineralization yield were obtained using the BiOBr microspheres synthesized with the IL at 145 °C.

For renewable energy, it is crucial to create effective photocatalysts with enhanced photo charge separation and transfer to produce photocatalytic hydrogen (H2) efficiently utilizing light energy. Due to their distinct qualities and features, carbonaceous materials have so far been shown to be high-performance co-catalysts to substitute some conventionally costly metal materials in photocatalytic water splitting. Here, a novel ternary nanocomposite, simple hydrothermal process ball milling assisted and wet impregnation approach, a promising ternary nanocomposite is created as an efficient solar light driven photocatalyst. Utilizing a variety of analytical techniques, 3 % Cu3P/ZnS/g-C3N4 nanocomposites as catalysts were characterized in order to check the hydrogen production and investigate their structural properties. The hydrogen production capability of the catalyst is studied by irradiating Na2SO3 + Na2S solutes using a halogen bulb (250 W). The results demonstrated that in terms of photocatalytic activity towards H2 production, 3 % Cu3P/ZnS/g-C3N4 catalyst performed better than 3 % Cu3P/ZnS, Cu3P, ZnS, and g-C3N4. A composite containing 7.5 wt% g-C3N4 demonstrated exceptional durability during photocatalytic hydrogen production, resulting in a 23,086 mol h− 1 g− 1 rate. Higher stability in electron-hole pairs created a higher absorption level of solar light could be responsible for this remarkable performance.

Glutathione (GSH) is the most abundant antioxidant in the majority of cells and tissues; and its use as a biomarker has been known for decades. In this study, a facile electrochemical method was developed for glutathione sensing using voltammetry and amperometry analyses. In this study, a novel glassy carbon electrode composed of graphene quantum dots (GQDs) embedded on amine-functionalized silica nanoparticles (SiNPs) was synthesized. GQDs embedded on amine-functionalized SiNPs were physical-chemically characterized by different techniques that included high resolution-transmission electron microscopy (HR-TEM), X-ray diffraction spectroscopy (XRD), UV–visible spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy. The newly developed electrode exhibits a good response to glutathione with a wide linear range (0.5–7 µM) and a low detection limit (0.5 µM) with high sensitivity(2.64 µA µM−1). The fabricated GQDs-SiNPs/GC electrode shows highly attractive electrocatalytic activity towards glutathione detection in the neutral media at low potential due to a synergistic surface effect caused by the incorporation of GQDs over SiNPs. It leads to higher surface area and conductivity, improving electron transfer and promoting redox reactions. Besides, it provides outstanding selectivity, reproducibility, long-term stability, and can be used in the presence of interferences typically found in real sample analysis.

We report the synthesis of a new range of ferrihydrite-graphene oxide (FH-GO) foams using chitosan as cross linker, with varying iron content (5 wt%, 10 wt%, and 20 wt% of FH) as highly efficient adsorbents for the removal of arsenic (III) (As(III)) in an aqueous solution. The sonochemical methods were adopted to synthesize various FH-GO foams and were further characterized by XRD, SEM, TEM, FTIR, Raman, and XPS techniques. The synthesized materials were used for the removal of As(III) in both batch and fixed bed absorbent column methods. The adsorption isotherm results showed that the 10 wt% of FH-GO foams demonstrated a superior adsorbent for the As(III) with high adsorption capacities than that of the other two FH-GO foams (5 wt% and 20 wt% of FH). Moreover, 10 wt% of FH-GO foams was also demonstrated to be nearly a complete (>98.4%) removal of As(III) ions at neutral pH 7. The adsorption isotherm fitted very well with the Langmuir model with the highest accuracy data for all the synthesized adsorbent materials. In addition, the fixed bed absorbent column method was also adopted for the removal of As(III) ions in the water sample, which showed > 99.2% of removal efficiency. The outstanding adsorption capabilities, along with their easy and low-cost synthesis, make these kinds of adsorbents extremely capable for commercial applications in wastewater treatment and drinking water purification.

This study sheds light on how the properties of titanium dioxide (TiO2) are influenced when it is modified with iron (Fe), leading to the formation of Fe-doped-TiO2, Fe2O3-TiO2 composite, and single-phase FeTiO3 systems. The structural formation of the materials, oxidation state, and chemical environments of the elements are analyzed using XRD and XPS techniques. Band structures with UV–visible light driven properties and suitable redox potentials with improved recombination resistance along with an active inter- and intra-charge transfers were observed for Fe2O3-TiO2 and FeTiO3 systems. The photocatalytic efficiency was found to be superior for FeTiO3 system, degrading ~97 and 100 % of phenol, malachite green and rhodamine B dyes in 150 min, respectively along with enhanced recyclability. Interestingly, a competitive S- and Z-scheme was predicted for Fe2O3-TiO2 composite, explaining its photocatalytic mechanism. The scavenger and total organic carbon analyses revealed the radicals driving the photocatalytic reactions and the nature of degradation products, respectively.

Tomatoes (Solanum lycopersicum L.) are widely cultivated and consumed, but ripening should be carried out in controlled storage conditions to extend their shelf life and avoid economic losses. The aim of this study was to investigate the effects of visible artificial light on the ripening and quality of fresh market tomatoes stored at a low temperature and high humidity. The postharvest performance with respect to the ripening of organically grown tomatoes in the Toscano cultivar, with a long storage life, was studied in the presence and the absence of visible LED light. The maturation kinetics of the tomatoes was modeled using the Power Law equation. Results showed that tomatoes stored in the presence of light exhibited an increased respiration rate and a faster preclimacteric phase. Lycopene content, total soluble solids, and maturity index increased in the presence of light. Hence, light increased the postharvest ripening of tomatoes, affecting their shelf life.