Dr. Espinosa-Neira, Eduardo

This work deals with the study of the open-source Arduino DUE board as a digital control platform for three-phase two-level Voltage-Source Converters (VSC) and Current-Source Converters (CSC), including (i) the description of the power topologies, its connection to the load or the ac grid, and the electrical signals required for sensors and power valves, (ii) the description of the Arduino Due board, its features, and its connection with the sensors and power valves in the converter, and (iii) evaluation of the Arduino DUE’s processing time required for typical power converter algorithms, such as modulation, mathematical transforms, and linear controllers typically used in these converters. Experimental results are presented to validate the study, showing that the Arduino DUE is a feasible digital control platform for this type of power converter.

Hierarchical control is a widely used strategy that can increase resilience and improve the reliability of the electrical network based on microgrid global variables. The large amounts of data required during transitions prompt the use of more reliable and flexible communications to achieve the control objectives. Such communications can involve potential cyber vulnerabilities and latency restrictions, which cannot be always addressed in real-time. To accurately capture the system’s overall operation, this paper proposes a co-simulation framework driven by flexible communications and a resilient control algorithm to regulate the frequency and voltage deviations in a networked microgrid. Model-based predictive control has been implemented, to avoid slow transient response associated with linear hierarchical control. Software-Defined Networking (SDN) is responsible for increasing the communication intelligence during the power-sharing process. The effects of critical communications and overall system performance are reviewed and compared for different co-simulation scenarios. Graphical Network Simulator (GNS3) is used in combination with model-based predictive control and SDN, to provide latency below 100 ms, as defined in IEC 61850. Testing of the proposed system under different cyber attack scenarios demonstrate its excellent performance. The novel control architecture presented in the paper provides a reference framework for future cloud computing-based microgrids.

Small grid-connected inverters are not friendly to the electrical grid, in the sense they do not take any action to support the grid when contingency events occur. For example, because of their relatively low power capacity, small grid-connected inverters are not designed to provide dynamic frequency support to the grid. On the other hand, it is well known that microgrids and weak grids including distributed generation would benefit significantly if all of the grid-connected converters could support and help against grid frequency disturbances. Within the family of small grid-connected converters, single-phase quasi-Z-source inverters (QZSI) have become an attractive topology, because they represent a reliable and economical alternative, and can be very efficient in applications that demand small or medium powers. However, a major disadvantage is that the control strategy must manage both direct current and alternating current variables through the same group of switches. The latter is a challenging task when implementing predictive control schemes. This paper proposes a finite control set model predictive control (FCS-MPC) strategy for a single- phase grid-supporting QZSI. The proposed predictive scheme can be easily integrated with a complementary control block to provide grid frequency support. Experimental results show evidence of the inverter operating under the proposed control strategy and providing grid frequency support, which demonstrates the feasibility of the proposal

The objective of this study is to explore the antecedents of the formation of entrepreneurial intention from a linear, causal and asymmetrical perspective. We have combined the Ajzen model applied to entrepreneurship, including two personality variables (self-confidence and creativity). This study involves a structural equation model based on partial least squares (PLS) and fuzzy set qualitative comparative analysis (fsQCA). All of the hypotheses were supported except for the influence of the variables subjective norms and self-confidence on EI. The PLS model explains 68.7% of the variance of EI. According to the fsQCA results, four models explain 88.1% of the existence of EI. The two models with the greatest degree of coverage are: Self-Confidence × Attitude Towards Entrepreneurial Behaviour × Subjective Norms and Perceived Behaviour Control × Creativity × Subjective Norms.

In this paper, we present an implementation of selective harmonic elimination modulation technique in a 27-Level asymmetric multilevel converter. The main issue in this kind of converters is the generation of the gating patterns to obtain an optimized AC voltage waveform. State-of-the art solutions use deep mathematical analysis in the frequency domain by means of the Fourier series, but they are mainly applied for two-level or symmetric multilevel converters. On the other hand, the modulation for asymmetric multilevel converters is mainly focused on nearest level control or nearest vector control. In this work, we propose a novel modulating technique that takes advantage of the switching angles optimization for a 27-level waveform. In fact, different set of solutions are obtained and presented in order to define the modulation index as well as the value of the switching angles for the multilevel waveform. A modulation index sweep was performed for the entire operating region of the converter, where it can be observed that the number of levels decreases when the modulation index is low, which are calculated in order to minimize the total harmonic distortion (THD) of the resulting voltage waveform. In order to validate the proposal, these results for different modulation indexes values are simulated, obtaining a THD < 5% for a modulation index 0.75 < M < 1.0. Finally, a small scale proof-of-concept prototype is implemented in order to validate the proposal. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.

This work deals with a Distribution Static Synchronous Compensator (D-STATCOM) based on a current-source converter for low and medium voltage distribution systems, specifically small and medium manufactures industries which are fined if the displacement power factor is below given limits. The D-STATCOM is analyzed using its mathematical model, showing the strong relation of the D-STATCOM power losses and its DC current level. Using the operating region of the D-STATCOM, an operating sub-region is defined such that the minimum DC current is used for a required reactive compensation, which leads to reducing the operating losses in the DSTATCOM. Also, Selective Elimination Harmonic is used to modulate the equipment to reduce the switching frequency while ensuring a desired current quality in the D-STATCOM input. As a result, a simple control strategy is proposed that uses a fixed modulation index while a phase control regulates the DC current to the lowest value required for reactive power compensation. Mathematical analysis jointly with simulated and experimental results corroborates the proposal, showing that it is possible to achieve a suitable compensation capability for improving the efficacy of the STATCOM.

Multicell converters, based on power cells that use low-voltage semiconductors, implement AC motor drives for medium-and high-voltage applications. These converters feature an input multipulse transformer, which performs low-frequency harmonics cancelation generated by three-phase diode rectifiers in the power cells. Despite this advantage, the multipulse transformer is bulky, heavy, expensive, and must be designed according to the number of power cells required by a specific case, limiting the modularity of the topology. This work proposes a multicell converter based on power cells that requires a standard input transformer and uses active front-end rectifiers controlled by employing a finite control set-model predictive control algorithm. The proposed approach emulates the multipulse transformer harmonic cancelation owing to the predictive algorithm operation combined with input current references that are phase-shifted for each active front-end rectifier. Simultaneously, the DC voltages of the power cells are regulated and equalized among the cells using PI regulators. Experimental results confirm the feasibility of the proposed system as input currents in each Multicell AFE rectifier with a unitary displacement factor, and a low THD of 1.87% was obtained. It is then possible to replace the input multipulse transformer with standard ones while reducing the copper losses, reducing the K factor, and extending the modularity of the power cell to the input transformer.

There is a need to ensure comfortable conditions for hospital staff and patients from the point of view of thermal comfort and air quality so that they do not affect their performance. We consider the need for hospital employees and patients to enjoy conditions of greater well-being during their stay. This is understood as a comfortable thermal sensation and adequate air quality, depending on the task they are performing. The contribution of this article is the formulation of the fundamentals of a system and platform for monitoring thermal comfort and Indoor Air Quality (IAQ) in hospitals, based on an Internet of Things platform composed of a low-cost sensor node network that is capable of measuring critical variables such as humidity, temperature, and Carbon Dioxide (CO2). As part of the platform, a multidimensional data model with an On-Line Analytical Processing (OLAP) approach is presented that offers query flexibility, data volume reduction, as well as a significant reduction in query response times. The experimental results confirm the suitability of the platform’s data model, which facilitates operational and strategic decision making in complex hospitals.

For medium voltage applications, multilevel inverters are used. One of its classic topologies is the Cascaded H-Bridge, which requires isolated DC voltages to work. Depending on the DC voltage ratio used in the Cascaded H-bridge can be classified into symmetric and asymmetric. In comparison between symmetric and asymmetric inverters, the latter can generate an AC output voltage with more output voltage levels. DC voltage ratio most documented are binary and trinary. The last can generate an AC voltage of 3n = 27 levels is obtained, using n = 3 inverters in cascade and NLM modulation, which generates a flow power of the load to the inverters (regeneration). This work analyzes the semiconductor losses (switching and conduction) and the THD of the AC output voltage in function of index modulation, considering a non-regenerative modulation technique for a 27-level single-phase asymmetric inverter. To confirm the theoretical analyzes, simulation and experimental results are shown.

The interest on weak and micro-grid systems has grown up substantially last time, specially tied up to distributed power generation systems (DPGSs), isolated systems as aircraft, or islanding power systems. These kinds of grids are usually under significant variation in their quantities, specifically in their voltage amplitude and/or frequency. On this line, many studies about synchronization methods have been developed, which may work under variations on the frequency value, unbalanced voltage, and even with harmonic distortion. However, power converters connected to this class of systems are poorly documented-specifically controlled rectifiers. In fact, most of the controlled grid connected converters (GCCs) are defined to work in a fixed frequency and balanced system. This paper deals with a GCC connected to a variable-frequency and unbalanced voltage supply system control through a predictive algorithm with a fixed resolution sampling strategy. Furthermore, the current references are imposed in order to help the weak-grid source subjected to unbalancing, taking more power from the phase with highest voltage amplitude and relaxing the other phases. This issue makes to calculate every phase current reference independently and accordingly the voltage amplitudes keep the dc-link voltage in a desired value. The results show the feasibility of the proposed algorithm, where the performance is highlighted by simulated and experimental waveforms.