Dr. Ulloa-Díaz, David

La percepción de la clase de educación física por parte de los estudiantes es un factor importante porque dependiendo de cómo los escolares perciban estas vivencias, se generarán determinadas creencias o valoraciones, las que influyen en la actitud para enfrentar estas experiencias corporales cada vez que se presenten. 176 estudiantes (14.74 ± 0.68), pertenecientes a los establecimientos particulares subvencionados de la comuna de Coronel. El objetivo de esta investigación es analizar la percepción actitudinal subjetiva de los estudiantes de enseñanza secundaria hacia los profesores de EF. Para evaluar la percepción actitudinal de los estudiantes hacia el profesor de educación física, se utilizó una modificación del cuestionario de actitudes de los escolares hacia la educación física. En los resultados de la actitudes positivas, se puede indicar que el alumnado valoro mayormente el ítem “Muy de acuerdo” en la pregunta “Mi profesor/a de educación física sabe mucho”, en las actitudes negativas la pregunta “Mi profesor/a de educación física levanta la voz frecuentemente” fue el mayor porcentaje en el ítem “Muy de acuerdo” . En el análisis comparativo entre hombres y mujeres para la percepción positiva reporto (p = 0.63) y negativa (p = 0.10). En el análisis por edades para la escala positiva (p = 0.01), para la escala negativa (p = 0.25). El alumnado observo mayormente actitudes positivas de y muy pocas negativas en el profesor de educación física, sin observase diferencias entre hombres y mujeres, en las edades se reportaron diferencias en las actitudes positivas y negativas del profesor, informando que los alumnos de con más edad evalúan más críticamente las actitudes positivas y negativas del profesor de EF.

El objetivo de este estudio fue determinar el efecto de la técnica de secuencias de bracing en la estabilidad del core y el rendimiento en kata de karatecas. 38 deportistas masculinos de karate participaron en el estudio divididos en un grupo experimental (n=21) y un grupo de control (n=17). La prueba de rendimiento del deportista y la prueba de estabilidad del core se realizaron en pretest y postest posterior a 8 semanas de programa de estabilidad del core (técnica de secuencias de bracing). El grupo experimental mostró una mejora significativa en la prueba de rendimiento del atleta (p < 0,001) y en la prueba de estabilidad del core con (p < 0,05). Hubo una correlación positiva muy fuerte entre la prueba de rendimiento del atleta y el cinturón del karateca (ρ =0.780), una correlación positiva considerable entre la prueba de estabilidad del core y el cinturón del jugador (ρ =0.604), una correlación positiva considerable entre la prueba de rendimiento del atleta y la edad del jugador (ρ=0.554), y una correlación positiva media entre la prueba de estabilidad del core y la edad del jugador (ρ=0.481). En conclusión, los karatecas mostraron una gran mejora en el rendimiento del kata y en el nivel de estabilidad del core después del programa de técnicas de secuencias de bracing.

El estudio tiene como propósito analizar la fiabilidad de la prueba de 8 lanzamientos de 3 diferentes variantes de lanzamientos de balonmano en estudiantado universitario. 33 varones, 20 ±1,9 años peso 72,39±8,9 kg altura 176,75 ±6,07 cm IMC 23,14±2,3. Los sujetos participantes fueron evaluados en 2 sesiones separadas entre sí por un lapso de una semana. Ejecutaron lanzamientos hasta quedar registrados 8 mediciones en cada una de las pruebas, lanzamientos inespecíficos, en apoyo y en carrera con 3 pasos, se registró la velocidad de lanzamiento con un radar posterior a la portería. La fiabilidad del promedio de las puntuaciones del test de 8 medidas entre la primera sesión y la segunda con una prueba test-retest, se obtuvieron los siguientes resultados: en el lanzamiento inespecífico se obtuvo un ICC= (0,86) entre el 95% de confianza, un de CV= (7,43%) y un ES= (0,08). Para el lanzamiento con apoyo se obtuvo un ICC= (0,94) al 95 % de confianza, un de CV= (4,71 %) y un ES= (-0,09). Para el lanzamiento con carrera se obtuvo un ICC= (0,96) al 95 % de confianza, un de CV= (4,00 %) y un ES= (0,05). Este estudio ha demostrado que la prueba de 8 lanzamientos y las 3 variantes es una medida de rendimiento confiable y estable para estudiantes de nivel universitario sin experiencia en el balonmano, en relación con las variables del lanzamiento, las 3 fueron fiables, solo la variable inespecífica fue menor en comparación al lanzamiento con apoyo y con carrera.

Purpose: This study aimed to examine the reliability of trunk extensor strength assessment with a functional electromechanical dynamometer (FEMD). Methods: Thirty-one men performed strength assessment at different velocities (V) (V1 = 0.15 m·s−1, V2 = 0.30 m·s−1, V3 = 0.45 m·s−1) and range of movement (R) (R1 = 25% cm; R2 = 50% cm), and isometric contraction at 90º. Reliability was obtained through the intraclass correlation coefficient (ICC), typical error (TE), and coefficient of variation (CV). Results: The absolute reliability provided stable repeatability of the average eccentric strength in the V1R1 condition (CV = 9.52%) and the maximum eccentric strength in V1R1 (CV = 9.63%) and V2R2 (CV = 9.66%). The relative reliability of the trunk extensor’s average strength was good (ICC = 0.77–0.83) for concentric and good (ICC = 0.78–0.85) and moderate (ICC = 0.67–0.74) for eccentric contraction. Also, good (ICC = 0.77–0.81) and moderate (ICC = 0.55–0.74) reliability of the maximum strength were obtained for concentric and eccentric contraction. The most reliable manifestation to evaluate the concentric (CV = 11.33%) and eccentric (CV = 9.52%) strength was the average strength in the V1R1 condition and the maximum strength (CV = 10.29%) to isometric assessment. The average concentric strength in the V2R2 condition (r = 0.69) and the maximum eccentric strength in the V1R1 condition (r = 0.65) were the best related to the maximum isometric strength. Conclusions: FEMD is a highly reliable device to evaluate trunk extensors strength.

The overhead throw is a fundamental technical-tactical ability for overhead sports. The purposes of this review are to assess the effect of resistance training (RT) in enhancing throwing velocity in athletes and to investigate the relationships between age or gender in this effect. Control group trials were identified through looking up electronic databases with a search span of 10th December 2020. Only studies which have control groups within research design, subjects randomly assigned to groups, healthy athletes with experience in the sport, an intervention consisting of a supervised RT program of a minimum duration of 4 weeks, and assessment of sport-specific throwing velocity were taken into account for this meta-analysis. A total of 16 studies with 424 subjects were deemed eligible per the inclusion criteria. The overall pooled analysis demonstrated that a large effect was observed for throwing velocity outcomes (ES 1.10; 95% CI 0.64–1.57; p < 0.00001). Differences were due to gender, with male (ES 1.12; 95% CI 0.55–1.78; p < 0.0001) and female athletes (ES 1.22; 95% CI 0.25–2.20; p < 0.00001). And due to age, with teenager athletes (ES 0.49; 95% CI -0.18–1.17; p = 0.04) and adult athletes (ES 1.34; 95% CI 0.64–1.92; p < 0.00001). Throwing velocity enhancement after RT was greater for women than for men, and for adults more than underage subjects. RT should last at least four weeks, with 2–3 sessions each week, and with any available implement.

Throwing velocity is one of the most important factors for scoring goals in handball. This study aimed to identify the type of throw and procedure for selecting the final test outcome that provide throwing velocity with the greatest reliability. Fifteen experienced handball players and 33 non-experienced participants were tested in two sessions. Each session consisted of 4 trials of 3 different throwing tests (unspecific, 7-meters, and 3-steps). The maximum value of 4 trials, average value of 4 trials, and average value of the 3 best trials were considered. Throwing velocity was highly reliable (coefficient of variation [CV]≤3.3%, intraclass correlation coefficient≥0.89) with the exception of the unspecific throw for the non-experienced group (CV≥5.9%, intraclass correlation coefficient≤0.56). The 3-steps throw (CV=1.7%) was more reliable than the 7-meters throw (CV=2.1%) (CVratio=1.19) and unspecific throw (CV = 3.8%) (CVratio=2.18), the 3 procedures provided a comparable reliability (CV range=2.4−2.6%; CVratio≤1.07), and the experienced group (CV=1.0%) presented a higher reliability than the non-experienced group (CV=4.0%) (CVratio=3.83). These results support the 3-steps throw to maximise the reliability of throwing velocity performance.

Background: The functional fitness of older people may be associated with their nutritional status. Aim: To assess the association between of anthropometric measures with functional fitness in older people. Material and Methods: Cross-sectional study conducted in 75 participants aged 65 to 89 years. Body mass index (BMI), waist-to-height ratio (WHtR), fat mass (FM) and skeletal muscle mass index (SMI) were calculated from anthropometric measures. The functional fitness was determined using the Senior Fitness Test battery. Results: BMI and FM indicated obesity, and WHtR indicated cardiometabolic risk in 49%, 55% and 83% of participants, respectively. SMI indicated a low muscle mass in 91% of females. Performance standards of chair stand, arm curl, 2-min step test and 8-foot up-and-go tests were met in 1%, 8%, 1% and 89% of participants, respectively. Significant negative correlations were found between 2-min step test and BMI, WHtR and FM (r = −0.26, −0.31 and −0.48 respectively). Back scratch had a negative correlation with BMI (r = −0.23) and SMI (rho = −0.28). Significant positive correlations were found between 8-foot up-and-go, WHtR (rho = 0.28) and FM (rho = 0.23), and between 2-min step test and SMI (rho = 0.28). The coefficient of determination (R2) between 2-min step test with BMI, WHtR and FM were 0.05, 0.08 and 0.22, respectively, while the R2 between back scratch and BMI was 0.04. Multiple regression models indicated that FM affected the 2-min step test independently of BMI and WHtR (adjusted R2 = 0.22), however age and sex negatively influenced these associations. Conclusions: Functional fitness of older adults is influenced by nutritional anthropometric measures, particularly BMI, WHtR and FM for aerobic capacity, and BMI for upper limb flexibility.

Background. The evaluation of the force in internal rotation (IR) and external rotation (ER) of the shoulder is commonly used to diagnose possible pathologies or disorders in the glenohumeral joint and to assess patient’s status and progression over time. Currently, there is new technology of multiple joint isokinetic dynamometry that allows to evaluate the strength in the human being. The main purpose of this study was to determine the absolute and relative reliability of concentric and eccentric internal and external shoulder rotators with a functional electromechanical dynamometer (FEMD). Methods. Thirty-two male individuals (21.46 ± 2.1 years) were examined of concentric and eccentric strength of shoulder internal and external rotation with a FEMD at velocities of 0.3 m s−1 and 0.6 m s−1 . Relative reliability was determined by intraclass correlation coefficients (ICC). Absolute reliability was quantified by standard error of measurement (SEM) and coefficient of variation (CV). Systematic differences across velocities testing circumstances, were analyzed with dependent t tests or repeated measures analysis of variance in case of two or more than two conditions, respectively. Results. Reliability was high to excellent for IR and ER on concentric and eccentric strength measurements, regardless of velocity used (ICC: 0.81–0.98, CV: 5.12–8.27% SEM: 4.06–15.04N). Concentric outcomes were more reliable than eccentric due to the possible familiarization of the population with the different stimuli. Conclusion. All procedures examined showed high to excellent reliability for clinical use. However, a velocity of 0.60 m s−1 should be recommended for asymptomatic male patients because it demands less time for evaluation and patients find it more comfortable.

This study examined the reliability and validity of three methods of estimating the one-repetition maximum (1RM) during the free-weight prone bench pull exercise. Twenty-six men (22 rowers and four weightlifters) performed an incremental loading test until reaching their 1RM, followed by a set of repetitions-to-failure. Eighteen participants were re-tested to conduct the reliability analysis. The 1RM was estimated through the lifts-to-failure equations proposed by Lombardi and O'Connor, general load-velocity (L-V) relationships proposed by Sánchez-Medina and Loturco and the individual L-V relationships modelled using four (multiple-point method) or only two loads (two-point method). The direct method provided the highest reliability (coefficient of variation [CV] = 2.45% and intraclass correlation coefficient [ICC] = 0.97), followed by the Lombardi's equation (CV = 3.44% and ICC = 0.94), and no meaningful differences were observed between the remaining methods (CV range = 4.95-6.89% and ICC range = 0.81-0.91). The lifts-to-failure equations overestimated the 1RM (3.43-4.08%), the general L-V relationship proposed by Sánchez-Medina underestimated the 1RM (-3.77%), and no significant differences were observed for the remaining prediction methods (-0.40-0.86%). The individual L-V relationship could be recommended as the most accurate method for predicting the 1RM during the free-weight prone bench pull exercise.

This aims of this study were (I) to determine the velocity variable and regression model which best fit the load-velocity relationship during the free-weight prone bench pull exercise, (II) to compare the reliability of the velocity attained at each percentage of the one-repetition maximum (1RM) between different velocity variables and regression models, and (III) to compare the within- and between-subject variability of the velocity attained at each %1RM. Eighteen men (14 rowers and four weightlifters) performed an incremental test during the free-weight prone bench pull exercise in two different sessions. General and individual load-velocity relationships were modelled through three velocity variables (mean velocity [MV], mean propulsive velocity [MPV] and peak velocity [PV]) and two regression models (linear and second-order polynomial). The main findings revealed that (I) the general (Pearson’s correlation coefficient [r] range = 0.964–0.973) and individual (median r = 0.986 for MV, 0.989 for MPV, and 0.984 for PV) load-velocity relationships were highly linear, (II) the reliability of the velocity attained at each %1RM did not meaningfully differ between the velocity variables (coefficient of variation [CV] range = 2.55–7.61% for MV, 2.84–7.72% for MPV and 3.50–6.03% for PV) neither between the regression models (CV range = 2.55–7.72% and 2.73–5.25% for the linear and polynomial regressions, respectively), and (III) the within-subject variability of the velocity attained at each %1RM was lower than the between-subject variability for the light-moderate loads. No meaningful differences between the within- and between-subject CVs were observed for the MV of the 1RM trial (6.02% vs. 6.60%; CV ratio = 1.10), while the within-subject CV was lower for PV (6.36% vs. 7.56%; CV ratio = 1.19). These results suggest that the individual load-MV relationship should be determined with a linear regression model to obtain the most accurate prescription of the relative load during the free-weight prone bench pull exercise.