Dr. Núñez-Castellanos, Eduardo

The use of column-tree connections is common in controlled shop environments due to their cost-effectiveness in achieving ductile welds. Field bolts are also easy to install and inspect. However, there is currently no prequalification available for these connections, their performance is not fully understood, and the cost of aftermath repairs is still a major concern for owners. In this research, analytical and numerical studies were performed to assess the cyclic behavior considering the effects of the bolted splice location, bolt slippage, and splice plate thickness. Fourteen numerical models using the finite element method in ANSYS software were analyzed to evaluate the nonlinear behavior of moment connection configurations in terms of the strength, stiffness, ductility, energy dissipation, and overall cyclic response. The results showed that appropriately proportioned bolted splice connections can meet the requirements for prequalified moment connections. The models complied with the criteria established in AISC 358 and achieved flexural resistance that was higher than 80% of the beam plastic moment at 4% of the interstory drift ratio. The weakened plates concentrated the inelastic action, which allowed us to prevent the brittle behavior and damage to the column, welding, and other components of the moment connection. Complex geometries or specially fabricated parts were not required, providing a cost-effective way to control seismic-related damage. Also, required repairs are based on the replacement of standard parts, reducing operational detentions in facilities. Finally, the moment connection studied is classified as partially restrained (PR) according to the requirements established in AISC 360.

Steel storage racks are structures commonly used by all industries in Chile; nevertheless, due the seismic hazard in the country and its configurations, these structures are highly vulnerable to earthquakes and no specific regulations exist to design them. In this research, the seismic performance of steel storage racks subjected to Chilean Earthquakes was evaluated using nonlinear pushover and nonlinear dynamic analysis. The studied models consider different heights and global slenderness ratios in both directions and soil types. Racks were evaluated using an Incremental Dynamic Analysis (IDA) according to FEMA P695. Deformation values were exceeded in the down-aisle direction and the use of braces was necessary to control the interstory drift and high deformation levels. Also, the expected level of damage for drift design limits in models unbracing is not enough to keep the operation of the structures and more severe regulations are necessary to achieve a performance in agreement with Chilean design philosophy. Finally, the use of horizontal and lateral bracing improves the seismic performance of steel racks.

A novel energy dissipation device is proposed to protect structures against dynamic loads. A conceptual model of the device is presented, describing the fundamental components of its operation. This model has a linear elastic element and a frictional damper. The equilibrium equations that lead to the relationship that governs its behavior are proposed. A functional model of the device was built on a 3D printer with PLA filament. Experimental trials were carried out to characterize its elastic component and the coefficient of friction of the damping parts. Proofs of concept load-unload tests were also carried out on the device, subjecting it to cyclical movement sequences. The results of the first two types of tests allowed the parameters of the previously developed analytical model to be calibrated. The results of the load-unload tests were compared with the predictions of the analytical model using the calibrated parameters. Consistency was observed between the experimental and analytical results, demonstrating the basic attributes of the device: self-centering capacity, dissipation capacity and force proportional to the displacement demand. It is concluded that the proposed device has the potential to be used effectively in the protection of structures under dynamic loads.

This paper presents an experimental research to assess the cyclic behavior of a bolted moment connection with the use of optimized end-plate connected to built-up box column subassemblies subjected to bidirectional and unidirectional loading. Seven real scale specimens were tested: three specimens with four beams connected to column as interior joint, two specimens with two beams connected as corner joint configuration and two specimens with two beams connected to column as interior joint, according the protocol established in AISC Seismic provisions. The seismic performance was evaluated in terms of hysteretic behavior, failure mechanism, stiffness and dissipated energy. The joints studied were manufactured from of hot-rolled I-beams and square built-up box columns. The elements of connection such as bolts, welding, outer stiffeners and end-plates were designed to remain in elastic range from the flexural expected capacity of beams. The results showed that the required minimum moment of 0.8Mp at 0.04 rad of drift angle was achieved for all specimens tested. However, a higher stiffness and resistance was reached in configuration with unidirectional load (interior joint) in comparison to joint subjected to bidirectional load (corner joint). The damage was concentrated uniquely in beams, while an elastic behavior in columns and connection components was reached for 0.04 rad of drift angle. Finally, this moment connection configuration can be used as an alternative to design buildings with special moment frames under bidirectional loading considering the cyclic behavior of joints evaluated.

In this research the seismic performance of eccentrically braced frames (EBF) with short links using Chilean earthquakes is studied. The study includes nonlinear static and dynamic analyses, calibration of numerical link models with experimental studies, and over 15,000 models analyzed. Results show that higher ductility and deformation are obtained in most archetypes, while models with 8 stories exhibit more stiffness and less ductile behavior. Furthermore, the strength capacity and ductility increase with the increment of the seismic zone and soft type of soil. Moreover, the research provides a table with the seismic design parameters for each archetype group comparing these values with Chilean seismic specifications. Finally, the study concludes that structures designed with more strength and stiffness have a lower collapse probability under extreme events. This research provides valuable information for structural design and includes fragility curves and a discussion of results that can be applied to structural design.

The Soil–Structure Interaction (SSI) effect has been widely evidenced during several earthquakes around the world. In the Venezuelan context, the seismic event in Caracas in 1967 showed the significant consequences of designing buildings without considering the SSI effect. Nevertheless, limited research on the seismic performance of concrete moment frames (commonly used as structural systems in office and residential buildings in Venezuela and Latin America) considering the SSI effects has been developed, although there have been continuous updates to the Venezuelan Seismic Code. In this research, the influence of the SSI on the seismic performance of RC moment frame buildings designed according to the New Venezuelan Seismic Code was studied. An extensive numerical study of 3D buildings using concrete moment frames supported by mat foundations on sandy and clayey soils was performed. The response spectrum method, non-linear static analysis, and non-linear dynamic analysis were used to assess the seismic response of the archetypes studied. The results show that SSI effects can have a significant impact on the seismic response of RC moment frame buildings, increasing the interstory drift ratio and decreasing the shear forces. As is shown in fragility curves, the probability of collapse increases for cases with flexible bases in comparison to the cases of models with fixed bases. Additionally, in the 24-story archetype, the fixed-base model reached a maximum probability of collapse. Finally, a new proposal for the reduction of the strength-reduction factor (R) must be incorporated into the Venezuelan Seismic Code to improve the safety of the structures. Limitations in the use of RC moment frames must be incorporated for high-rise buildings since, as the present work demonstrates, for high-period structures, the normative provisions are not reached.

Concrete strength assessment is an important topic in evaluating existing structures. Formerly, only destructive tests were employed, limiting the number of tests due to their complexity and cost. Nowadays, the application of non-destructive tests has been booming to determine material strength, offering a more accessible and cheaper strategy than its counterpart. Non-destructive strategies are based on two steps: (1) the identification of the correlation between the concrete strength and another parameter that is easy to measure in situ, and (2) the use of this easy-to-measure parameter to infer the concrete strength in any desired element of the structure. The most common parameter adopted for this purpose is the Ultrasonic Pulse Velocity (UPV). However, the correlation between concrete strength and UPV must be determined via destructive experiments. From the research perspective, attention has focused on determining the correlation coefficient and the range of credibility for estimating the inferred concrete strength. Despite it, this strategy has remained elusive in the fundamental understanding and accounting of the joint dispersion of the concrete strength and the UPV. The present work addresses this knowledge gap by proposing a new correlation method based on probability interpretations to infer the compressive concrete strength from in-situ UPV measurements and including the dispersion evidenced in UPV measurements in both steps mentioned. The results demonstrated that it is possible to determine the confidence interval for the concrete compressive strength given a certain percentile of the UPV measured in situ. Finally, the application of the proposed method is illustrated through a case study, which is representative of different building pathologies. This novel proposal is a foundation to deal with the uncertainties involved in non-destructive tests, inspiring future advances in this field.

The behavior of the web panel zone has a direct effect on the cyclic performance of steel moment connections. While the mechanisms of web panel zone failure are known under cyclic load, little is known about the behavior of the web panel zone under bidirectional loads in bolted connections. Using experimental tests and calibrated numerical models, this research evaluated the web panel zone behavior under unidirectional and bidirectional cyclic loads. The results showed that bidirectional load can modify the stress and strain distribution in the web panel zone. Moreover, the increasing of the width-to-thickness ratio of the column influences the failure mechanism of the joint configuration and increases the plastic incursion in the column. These data demonstrate that bidirectional effects improve the web panel zone performance under cyclic loads.